Capacitor Machinery

SL-M700

( Slitter / Re-winder )

SL-ML Series

( Slitter / Re-Winder )

• SL-ML Series are designed to cope with precise requirements of thin films which including PET, PP un-coated film and metallized PP, PE films for capacitor.
• SL-ML Series are versatile and compact machine which process high quality slit reels of any width within the specified limits.
• DThe rewinding system of the machine combines surface take-up drive with center drive and take-upreels can be drive or undrive.
  a. Take-up widths driven from 25mm up to 150mm
  b. Take-up widths undriven from 10 to 25mm (optional)
• Each arm has its own adjustable device, so that the correct tension can be applied independently to each reel, individual tension control allows different slit widths, varying thickness, different rewind diameter be run together, and tensions across the parent reel can be more easily handled.
• If film thickness uniformity is good, one single rewind shaft be used to increase productivity and reduce down-time (optional).Slit width: 5~150 mm

URM Series

( Auto Winding Machine )

URF-P407 Series

( Winding PLC Machine )
This series are particularly designed for mixed producing of Metallized Film Capacitor and Non-Inductive
Foil Capacitor, which has efficacy of series capacitor and power capacitor. It can wind Standard Capacitor, Non-Inductive Foil Capacitor, Foil Series Capacitor and Metallized Film Plus Foil Series Capacitor.
The following winding structures are for reference.

URF Series

( Film Capacitor Winding Machine )

URAE-210 / URAE-220

( Winding M/C-Electrolytic )

URBS Series

( Auto Winding M/C-Battery )
This Lithium Ion Rechargeable Battery semi-auto winding machine was designed in accordance with rechargeable battery research and small batch production demand, base on the plentiful experiences of our company in manufacturing many kinds of winding machine. Because of the distinct design of Lithium Ion Rechargeable Battery, this winding machine is differentiated into WOUND TYPE such as SONY-US61/18650 and FLAT TYPE such as TOSHIBA-IRF074.

URTP-25T-5

( Thermal Press Machine )
This THERMAL PRESS MACHINE is particularly designed for producing metallized film capacitors and its function is to press and heat the winded elements in order to stabilize the quality and also increase the effect of automatic operation.

URMS-OHM95

( Capacitor Masking Machine )
This AUTOMATIC PAPER MASKING MACHINE
is mainly used in packing coil with kraft paper tape before metal spraying in order to avoid making short or getting damage. Besides, it is thereafter easy to unwrap the protected tape after metal spraying without damaging coil. Hence, using this machine is the best way to save your time and manpower economically.

LSSP-500A

( Spraying Machine )
The Metal Spraying is a very critical operation in the manufacture processes of metallized film capacitor. Since the metal particles are produced by wire melted and high velocity to coat in the end faces, it makes contact with the capacitor winding primarily by partial penetration of the pockets in the
end faces formed by staggering the films. Factors which affect the degree of penetration are mainly the velocity of the metal spray particles and their size. So the following important factors are influential capacitors quality: The temperature of metal spray particles, the size of metal spray particles, the velocity of metal spray particles, the average of metal spray particles

Incorrectly selected spray equipment can cause severe damage to end faces of the windings and produce unacceptably high power factor capacitors. The AUTOMATIC METAL SPRAYING MACHINE is designed through our comprehensive research and accumulated ten-year of experience; as the requirements of regarding above specially performance of metal spraying in metallized film capacitor.