SL-M700 , Slitter/Re-winder

Slitter/Re-winder

• This machine is designed to cope with precise requirements of thin films such as Copper foil, Al. foil…etc.
• Rigid frame — Both side panels are assembled with the base on heavy steel, assure tram and vibration free operation.
• Driven system — AC SERVER motor with tacho-generator, and transmit by timing belt, It includes functions as soft start, soft stop, emergency stop. All controls are located on control panel in the front of machine.
• Unwind tension control — Equipped with powder brake and automatic tension controller to get the optimum tension on unwind side at high speed.
• Rewind tension control — Equipped with auto tension control LOAD CELL and Air-Friction Shaft.
• Web guide system — Edge position controller to guarantee the slitting margin very accurate in the range of ± 0.1mm.
• Rewind arm — Equipped with Air-Friction Shaft.
• Knife System — Equipped with GANG CUT and SHEAR CUT system, it was designed by cassette, so it can be shifted easy.
• Edge waste trimming — By united axle rewind.
• Easy maintenance — Hinge-out electric for easy maintenance.
• Special design of any width slitting is available.

Web: 1/3~1 OZ pure Cu or compound Film 20~180μm Unwind Width: 650mm Unwind Diameter: Max. Φ500mm Unwind Core I.D.: Φ76/152mm Rewind Diameter: Max. Φ250mm Rewind Core I.D.: Φ76mm Slit Width: 250mm

Machine Speed: 50M/Minute Running Speed: Depending on material quality and slitting width to be processed. Unwind and Rewind: By Different Side. Operation Panel: Touch Control Monitor Power: AC 380V 50Hz 3Φ 4w Air Supply: 5 Kg/cm² Machine Size: (L) 1800 x (D) 1900 x (H) 1450 mm